HUSH-SYSTEM Premier™
HD1027

To view the system diagram on a larger scale, please view the Data Sheet found within the Data tab above.

• Hush-Panel 48, all teegee joints glued using Hush-Bond, laid over floor deck, as per manufacturer’s instructions, with all perimeters sealed using Hush-Seal 20.
• Hush-Slab 100 fitted between joists with Hush-Bars screw fixed to the underside of joists at 600mm centres and at right angles to the joists.
• Two layers of 15mm Gyproc Soundbloc plasterboard secured to Hush-Bars. Seal all perimeters prior to skimming.

© HUSH (UK) LIMITED 2007

• Complies with UK Building Regulations Approved Document E.
• A fully developed economical sound insulation system between separating floors.
• For use in refurbishment and new build projects.
• Provides a 1 hour fire resistance at ceiling level.

UK Building Regulations approved Document E 2003 incorporates a unit of measurement to determine low frequency airborne sound transmission. Due to proven intrinsic difficulties of measuring low frequency sound, in domestic sized rooms, it must be expected that there could be significant deviations in the accuracy of these measurements. Furthermore, there will be variations from site to site due to structural differences in buildings, general site conditions and workmanship. All these factors can influence the repeatability of both impact and airborne acoustic test results. Therefore, any test results must be considered as an indication only and no warranty can be given or implied as to the actual acoustic performance in any particular situation.