Home / Systems / Hush-Cradle System

HUSH-CRADLE SYSTEM™
HD1031

HUSH-CRADLE SYSTEM

To view the system diagram on a larger scale, please view the Data Sheet found within the Data tab above.

  • 18mm chipboard, all teegee joints glued using Hush-Bond and sealed to all perimeters using Hush-Seal 20, laid over 47mm x 50mm timber battens, supported by Hush-Cradles at 450mm centres and height adjusted.
  • Hush-Slab 75 fitted between Hush-Cradle and batten runs, ontop of existing 22mm floorboards.
  • MF ceiling system suspended from underside of joists creating 300mm void.
  • 2 layers of 12.5mm Gyproc Fireline plasterboard secured to MF ceiling hangers with Hush-Slab 100 fitted in between over back of ceiling.

© HUSH (UK) LIMITED 2007

  • Complies with UK Building Regulations Approved Document E.
  • For use in refurbishment and new build projects between separating floors. Ideal for large industrial change of use conversions with uneven surfaces.
  • Provides a 1 hour fire resistance at ceiling level.

Approved Document E 2003

UK Building Regulations approved Document E 2003 incorporates a unit of measurement to determine low frequency airborne sound transmission. Due to proven intrinsic difficulties of measuring low frequency sound, in domestic sized rooms, it must be expected that there could be significant deviations in the accuracy of these measurements. Furthermore, there will be variations from site to site due to structural differences in buildings, general site conditions and workmanship. All these factors can influence the repeatability of both impact and airborne acoustic test results. Therefore, any test results must be considered as an indication only and no warranty can be given or implied as to the actual acoustic performance in any particular situation.