HUSH-SLAB 100 - Sound Absorber

hush-slab-100
Enquire About this Product

Suitable for:

  • Industrial
  • Leisure
  • Residential
  • Education
  • Healthcare

Hush-Slab 100 has been developed to reduce airborne sound transmission through separating floors, ceilings and walls within both new build and refurbishment projects and is manufactured by a unique process, utilising renewable energy and a sustainable source of raw material. Hush-Slab 100 provides excellent acoustic performance, reducing airborne sound as part of a recommended sound insulating system for separating floors, ceilings or walls.

  • A unique high density sound insulating slab available in varying thicknesses to suit many applications
  • Excellent acoustic and thermal properties
  • Non-combustible; Class 'O' fire rating
  • Used extensively within refurbishment and new build projects to reduce airborne sound through system designed floor, ceiling and wall structures
  • Compatible with a full range of Hush-Systems, designed to exceed the current Building Regulation requirements of Part E (England and Wales), Part H (Scotland) and Part G (Northern Ireland).
  • Simple to cut and install

For advice on the specification or use of Hush-Slab 100 within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and tailored advice to meet with your requirements.

Safety

Use protective gloves when handling - beware of sharp edges

Test Data

Test data for field tests in compliance with Building Regulations Document E can be supplied upon request.

Product Data

Application
In between floor and ceiling joists and wall studs to suit system requirements.
Comprises

High density mineral fibre produced from non-combustible inorganic rock it is defined as 'mineral wool' in BS 3533 and complies fully with the recommendations of BS 5422 and BS 3958: Part 5.
Durability
Will not encourage the growth of fungi, mould or bacteria, does not sustain vermin, is rot-proof, odourless and completely non-hygroscopic.
Fire Performance
Non-combustible, Class 'O' to Building Regulations achieving both a Class 1 Spread of Flame to BS 476: Part 7 and the required indices of performance of fire propagation to BS 476: Part 6.
Compatible Hush-Systems

Hush-System 2003, Hush-System 2003 Plus, Hush-System 2003 Advanced, Hush-System 1, Hush-System IC, Hush-System HF25, Hush-System HF25 Advanced.
Thicknesses available
mm
Thermal Conductivity
W/mK
Thermal resistance
m²K/W
Slab size
mm
Slabs
per pack
Area
per pack
m²
100

0.035

2.85
1200x600
5
3.6
75
0.035
2.10
1200x600
8
5.76
50
0.035
1.40
1200x600
12
8.64
25

0.035

0.70
1200x600
18
12.96

Cut the Hush-Slabs to the required void width using a sharp saw or long blade, and starting at one of the room perimeters, begin fitting the slabs in between the floor joists or wall studs. At the end of each run, cut the last slab to the required length and then continue the process until all voids are filled, ensuring there are no gaps. Any excess trimmings can be used to pack in alongside the full slabs, avoiding any waste. Hush-Slabs can be friction fitted from below when using within a ceiling system.

Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.

Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.

Technical information

Would you like to know more about our products?

Please prove you are human by entering the code in the box below.

CAPTCHA Image

[ Different Image ]