Home / Products / Floating Flooring / Hush-Panel 17

HUSH-PANEL 17 - Floating Flooring

1. Lay the Hush-Panel 17 Floating Flooring in a conventional broken bond pattern.

2. Glue all teegee joints using Hush-Bond Panel Adhesive.

3. Leave a 10-15mm expansion gap around all perimeters and press in Hush-Seal 20 Perimeter Seal ensuring that the floor floats freely of the walls maintaining acoustic isolation or perimeter detail as per Robust Detail instructions using Hush-RD Flanking Strip.

At door thresholds, access hatches or in the absence of a teegee joint Hush-Grommet Fixing Isolators can be used sparingly to eliminate ‘lipping’. No other fixings should be used when fitting the floating floor as any restrictions can adversely affect performance. Skirting should be fitted two or three millimeters clear of the floor surface. (PCT only).

Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.

Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.

Hush-Panel Floating Flooring is also available in the following thicknesses and materials:

Hush-Panel 28
18mm High Density P5 T&G chipboard panels with 10mm Hushfelt™ resilient layer

Hush-Panel 32
22mm High Density P5 T&G chipboard panels with 10mm Hushfelt™ resilient layer

Hush-Ply 28
18mm WBP T&G plywood panels with 10mm Hushfelt™ resilient layer

Hush-Panel Premier 48
18mm High Density P5 T&G chipboard panels with 30mm Hushslab30™ resilient layer

Hush-Panel Premier 52
22mm High Density P5 T&G chipboard panels with 30mm Hushslab30™ resilient layer

Installation Guide - 210KB